Dishwasher / User’s Manual
39 / 50 EN
OPERATING THE PRODUCT
End of programme
End of Programme indicator will light up once the
washing programme is over.
1. Press the On/Off button to turn off your machine.
2. Close the tap.
3. Unplug the machine from the socket.
C
For energy saving, the product
is automatically turned off
following the completion of the
programme or if the programme
is not started.
C
Leave your dishes in the machine
for about 15 minutes to cool
down after they are washed.
Your dishes will dry in a shorter
time if you leave the door of your
machine ajar during this period.
This process will increase the
drying effectiveness of your
machine.
Water cut-off warning
If mains water is cut or water inlet tap is turned off the
machine cannot take water in and E:02 icon will flash
on the programme indicator. As long as the problem
continues, washing programme is paused and the
water inlet is checked regularly by the machine; when
the water is restored E:02 icon will disappear after a
while and the washing programme resumes.
Overflowing warning
If the machine intakes too much water or there
is leakage at any of the components then the
machine will detect this and E:01 icon will flash on
the Programme indicator. As long as the overflowing
continues safety algorithm will be active and try to
discharge the water. If overflowing stops and safety
is assured, E:01 icon will disappear. If E:01 does not
disappear, there is a permanent fault. In this case the
authorised service should be contacted.