23
GB
Press the Start/Pause/Cancel button
again to deactivate the key lock and
resume the programme if the key lock
is activated after you have completed
your operation.
Canceling a programme
You need to perform a canceling
operation if you want to end a
programme before it is over. To cancel
a programme:
Deactivate the key lock if it is active.
“Paused” is displayed if you press the
Start/Pause/Cancel key when the key
lock is deactivated. If you continue to
keeping the Start/Pause/Cancel key
pressed, the countdown of 5 seconds
starts and the following messages are
displayed consecutively:
“Cancel 5”
“Cancel 4”
“Cancel 3”
“Cancel 2”
“Cancel 1”
“Cancel”
Release the key at the end of the
countdown.
The message
“Cancelling”
is displayed for 45 seconds during the
discharge operation.
“Cancelled”
will be displayed when the operation
is completed. In this case, you can
turn off your machine with the “On/
Off” key or make it ready for the next
cycle by pressing the “Start/Pause/
Cancel” button.
WARNING:
There might be residues of detergent
or rinse aid in the machine and/or on
the pieces already washed depending
on the step the cancelled programme
was in at the end of such cancellation.
Programme Step Follow-up
You can follow up the washing step of
the current programme by means of
the warning notes on the display.
“Washing”
is displayed for the steps at which
the food remnants are removed or a
washing with detergent is made.
The degree of soiling of the dishes is
determined by measuring the degree
of soiling in the washing water by
means of the cleanliness sensor.
The cleanliness sensor determines
what to do in the following steps by
measuring the degree of soiling of the
water regularly. Washing temperature,
washing time, washing pressures and
water amount is adjusted on basis of
the information received from the
cleanliness sensor. This programme is
developed to avoid unnecessary water
and energy consumption by washing
the dishes in the most appropriate
conditions for the degree of soiling of
the dishes.
“Analysing”
is displayed during the decision steps.
The analysis is made during the first
10-30 minutes at the beginning
of the washing depending on the
temperature of the mains water,
dissolution rate of the dirt and level of
