background image

17

Dishes  should  be  allowed  to  cool  for  about

15 - 30 minutes after the end of the programme.
You will improve drying results by leaving the

dishwasher door ajar for at least 15-30 minutes

as soon as the programme finishes.

! Care must be taken when opening the

door, as steam will escape.

First unload the lower, then the upper rack. This

prevents drops of water  from falling onto the full

lower basket when the dishes in the upper basket

are being removed.

Cleaning your machine at regular intervals ensures

longer product life and reduces the risk of recurring

problems. Clean spray arms and in particular filters

at least once a week

!

Always unplug the appliance and turn off the

water supply before cleaning.
To clean the outside of the appliance and the

door seal, use a neutral detergent and a damp

cloth. To clean the control panel, use only slightly

damp cloth.

!

Do not use abrasive detergents.

If the appliance is not going to be used for a long

period of time, switch off, turn off the water clean

and leave the door ajar.

·

Turn the water tap on. Open the door of the

machine.

·

Check that the upper and lower arms can rotate

freely.

·

Pour (Put in) the detergent.

·  

Close the door of the machine.

·

Push in the on/off button and check that the

on/off indicator light comes on.

·

Check the salt and rinse aid level indicator

lights before you start the machine. If necessary

add salt and rinse aid.

·

Select the required programme by referring to

the programme chart.

·

Select the desired programme by turning

the selector knob.

·

Press start / stop button and check that the

function indicator light comes on.

!

Do not open the dishwasher door whilst the

appliance is in operation. However, in case the

door is opened while the machine is working,

then a safety mechanism ensures the machine

immediately stops. Water may be very hot, so be

careful.

!

Care must be taken if opening the door, as

steam and water will escape.

·

Press the on/off button after the programme

is completed.  The indicator light will go off.

·

Turn off the water tap, unload the baskets.

!

Just  after  the  dishwasher  has  started  the

selected programme, if you find that you want to

put in another item to be washed, then switch

the dishwasher off by pressing the On/Off button,

the indicator light will go off, wait for a few

moments and then open the door carefully. Then

after putting in the item, switch it back on again.

The indicator light will come on and the dishwasher

will resume operation.

Summary of Contents for DE2431F





















Reviews: