36
USA
10.4 CLEANING THE HOSE
FILTER
Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust, etc.)
can be prevented by means of the filter
attached to the water inlet hose. Check the
filter and the hose regularly and clean them
if necessary.
1. Turn off the tap and remove the hose.
2. After taking out the filter, clean it
under running tap water.
3. Place the cleaned filter back to its seat
in the hose.
4. Install the hose to tap.
(Select Models)
10.5 CLEANING THE WASH
ARMS
Clean the wash arms at least once a
week in order for the machine operates
efficiently.
LOWER WASH ARMS
Check if the holes on the lower wash arms
(1) are clogged. If they are clogged, remove
and clean the impeller. Pull the lower wash
arms up to remove it.
UPPER WASH ARMS
Check if the holes on the upper impeller (1)
are clogged. If they are clogged, remove
and clean the wash arms. Turn its nut to
left to remove the upper wash arms.
Make sure that the nut is tightened well
when installing the upper wash arms.
