Beko DDT28430X, User Manual

Page: 23 / 45

21
USA
Interior Lighting
(MODEL DEPENDING)
Some models have interior lighting to
illuminate the interior when the door is
opened.
Changing the interior lighting
setting
1. After turning on the machine,
press Time Delay and P+ keys
simultaneously. Continue to press until
the countdown 3, 2, 1 is completed on
the display.
2. Press P+ key to activate the L: option.
The interior lighting is turned off at
"L:0" option and turned on at "L:1"
option. Set the desired option with the
Time Delay key.
3. Turn off the machine with On/Off key
to save the changes.
Floor illumination
Warning to show that machine is
in washing phase
(MODEL DEPENDING)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
C
Floor illumination is activated
automatically when the
washing programme starts and
remains lit until the end of the
programme.
C
Floor illumination cannot be
cancelled by the user.
order to optimize the washing and drying
performance.
C
Notice: Automatic detergent
detection feature should be
deactivated during the tests
according to AHAM DW-1.
To deactivate:
1. After turning on the machine, press
Time Delay and P keys simultaneously.
Keep them pressed until the
countdown 3, 2, 1 is completed on the
display.
2. Press P key to activate the a: option.
Automatic detergent detection feature
is disabled at “a:0” option and enabled
at "a:1" option. Set the desired option
by pressing the Time Delay key.
3. Turn off the machine with On/Off key
to save the changes.
Automatic Detergent Detection
Feature
The product has a feature to automatically
detect the type of the detergent and
adjust the washing programme and drying
system to the best performance. If special
tablet detergent is used, the programme
duration can be extended by 20 minutes in
Changing Warning Sound Volume
1. After turning on the machine,
press Time Delay and P / P+ keys
simultaneously. Keep them pressed
until the countdown 3, 2, 1 is
completed on the display.
2. Press P / P+ key to activate the S:
position.
3. Each pressing on the Time Delay key
will change the warning sound volume
as "S:0" off, "S:1" medium" and "S:2"
high.
4. Turn off the machine with On/Off key
to save the changes.
C
Factory setting of your machine
is "S:2".