Beko DDT28430X User Manual Download Page 22

Page: 22 / 45

USA

Sanitize Function

Sanitize function raises the water

temperature in the final rinse to meet the

requirements of NSF/ANSI STANDARD

184 for Residential Dishwashers. Certified

residential dishwashers are not intended

for licensed food establishments.

At the end of a succesfull

sanitization “S“ is displayed on

the display. “S” is not displayed

on the display if the cycle is

interrupted or the water could

not be heated to the required

temperature.

Available programs are

indicated on Program Table

chart.

Note: Only sanitizing cycles

have been designed to meet

the requirements of 6 for

soil removal and sanitization

efficacy.

There is no intention, either

directly or indirectly, that all

cycles have passed sanitization

performance tests.

Half Load function

It is used to operate the machine without

loading it completely.

1. Load your dishes in the machine as you

like.

2. Turn the machine on with On/Off key.
3. Select the desired programme and

press the Half Load key. The Half Load

indicator will light on the display in the

Function Selected indicator.

4. Close the door of the machine to start

the programme.

With the Half Load function you

can save both water and power

while using the lower and upper

baskets of the machine.

6.4 AUXILIARY FUNCTIONS

Washing programmes of your dishwasher

are designed to obtain the best cleaning

effect, considering the type of the soiling,

soiling degree and properties of the dishes

to be washed.

Auxiliary functions allow you save from

time, water and power.

Auxiliary functions may cause

changes in the programme

duration.

Auxiliary functions are not

suitable for all washing

programs. Indicator of the

auxiliary function that is not

compatible with the programme

will not be active.

SteamGloss Function

It provides superior drying performance.

AquaIntense Function

AquaIntense impeller

located under the

lower impeller helps

washing your heavily

soiled dishes places in

the right side of the

lower basket. It will give better results to

place the most soiled dish to the right front

side.

Do not try to remove the

AquaIntense impeller!

Summary of Contents for DDT28430X














































Search results

Summary of Contents for DDT28430X

Reviews:

Related manuals for DDT28430X

Brands by name

Popular brands

Beko DDT28430X, User Manual

Search results

Summary of Contents for DDT28430X

Reviews:

Related manuals for DDT28430X

Brands by name

Popular brands