background image

39

USA

13. WARRANTY 

STATEMENT FOR THE 

BEKO DISHWASHERS

The warranties provided by Beko in 

these statements only apply to Beko 

dishwashers sold to the original purchaser 

or homeowner in the US and Canada. The 

warranty is not transferable. To obtain 

warranty service, please contact our 

nearest distributor as listed by state and 

province. You will need your dishwasher 

model number, serial number, retailer 

name and address, where purchased and 

purchase date / installation date. This 

warranty gives you specific legal rights, and 

you may also have other rights which vary 

from state to state. Also, please make sure 

you register your product for warranty at 

www.beko.us

1 year (*) full warranty from date of 

first installation

Beko will repair or replace at no cost to 

the consumer any defective parts of the 

dishwasher if used under normal household 

conditions 

(warranty is void if the product 

is used commercially e.g., bed 

+ breakfast, nursing home etc.). 

Service must also be performed by 

an authorized Beko service agency. 

(Cosmetic defects must be reported 

within 10 business days from 

installation). 1 year warranty on the 

accessories is for the parts only and 

doesnot include labor.

2 year*++ limited warranty from 

date of first installation (Parts only) 

Beko will repair or replace any 

parts at no cost to the consumer if 

material defects or workmanship 

have caused the damage or failure 

of these components. Again the 

dishwasher must have been used 

under normal household conditions 

and not commercially as stated 

above (Labor charges are the 

responsibility of the consumer).

2-5 year (*, **) limited warranty from 

date of first installation 

(parts only 2-5 years) Beko will repair or 

replace any compressors, evaporators, 

condensers and dryers at no cost to 

the consumer if material defects or 

workmanship have caused the damage or 

failure of these components. 

The dishwasher must have been 

used under normal household 

conditions and not commercially 

(Labor charges are the 

responsibility of the consumer)

Disclaimers of warranties and 

exclusions:

Warranty does not cover service 

costs by an authorized service 

agent to correct installation, 

electrical problems or educational 

instruction on the use of the 

dishwasher. The warranty also 

does not cover defects or damage 

caused by an act of God (such as 

storms, floods, fires, mudslides, 

etc.), damage cause by use of the 

dishwasher for purposes other than 

those for which it was designed, 

misuse, abuse, accident, alteration, 

improper installation, maintenance, 

travel fees, service calls outside 

normal service hours, pick up 

and delivery, any food loss due 

to product failure, unauthorized 

service work or work.

Summary of Contents for DDS25840X












































Reviews: