background image

21

USA

6.7 CANCELLING THE 

PROGRAMME

Open the door of the product Press 

and hold the Programme Selection / 

Programme Cancel keys for 3 seconds. 

After the 3 - 2 - 1 countdown, 0:01 is 

displayed, close the door of the product 

and wait for the draining process complete. 

Draining is completed in 2 minutes and the 

machine gives an audible warning when it 

is completed. 

C

There might be residues of 

detergent or rinse aid in the 

machine and/or on the pieces 

being washed depending on the 

step the programme you have 

cancelled was in.

6.8 SALT INDICATOR ( )

(MODEL DEPENDING) 

Please check the salt indicator on the 

display to see whether there is adequate 

amount of softening salt in the dishwasher 

or not. You need to refill the salt reservoir 

with salt whenever salt indicator appears 

on the display of your machine.

C

Adjusting the water hardness 

level is explained in Water 

Softening System section.

6.9 RINSE AID INDICATOR (

)

Please check the rinse aid indicator on the 

display to see whether there is adequate 

amount of rinse aid in the dishwasher or 

not. You need to refill the rinse aid reservoir 

with rinse aid whenever rinse aid indicator 

appears on the display of your machine.

6.10 END OF PROGRAMME

C

When the programme you have 

selected comes to an end, an 

audible warning signal will warn 

you to turn off your machine. 

This audible signal will warn you 

with certain intervals before it 

turns off.

End of Programme indicator will light up 

when the washing programme is over.

1.  Open the door of the machine.
2.  Press On/Off key to turn off your 

machine.

3.  Close the tap.
4.  Unplug the machine from the socket.

C

For energy saving, the machine 

is automatically turned off 

following the completion of the 

programme or if the programme 

is not started.

C

Leave your dishes in the 

machine for about 15 minutes 

to allow them cool down after 

they are washed. Your dishes 

will dry in a shorter time if you 

leave the door of your machine 

ajar during this period. This 

process will increase the drying 

effectiveness of your machine.

Summary of Contents for DDS25840X












































Reviews: