Beko DCU 7430, User Manual

Page: 35 / 64

35 EN
Auxiliary function
Cancel audio warning
Your dryer will give an audio warning when
the programme comes to an end or each time
you press the buttons. If you want to disable
the audio warning, press the Programme "-"
and End Time "+" buttons simultaneously for 3
seconds. "off-bzr-off" appears on the display.
Machine does not give an audio warning at
the end of the programme or when a button
is pressed. You can enable the audio warning
by pressing the same buttons simultaneously
again for 3 seconds. If you do so, "on-bzr-on"
appears on the display and audio warning is
enabled.
C
You can select this function either before or
after the programme starts.
Warning indicators
C
Warning indicators may differ according to
the model of your machine.
Lint filter cleaning
A warning light will turn on to remind filter
cleaning after the programme finishes.
C
If the filter cleaning warning lights up
continuously, please refer to, “Suggested
solutions for problems”.
Water tank
A warning symbol will turn on at the end of
the programme or when the tank is full with
water. The machine stops operating when this
warning symbol lights up while a programme
is running. To restart the machine, please
drain the water in the water tank. Press "Start/
Pause" button to start the program after you
have emptied the water tank. The warning
symbol turns off and the programme resumes
operating.
Specifying the end time ( Ending
In)
With the “Time delay” function you can delay
the ending time of the programme up to 24
hours.
1. Open the loading door and put the laundry
in.
2. Once the programme is selected, set the
end time with end time ‘‘+’’ , ‘‘-’’ buttons.
End time symbol flashes.
Press "Start/Pause" button to start the time
delay function. Delay time appears on the
display and End Time symbol and Start/Pause
symbol illuminates. The time on the display is
the total of normal drying time and delay time.
Changing the delay time
If you want to change the time during the
countdown:
1. Press Start/Pause button. End Time symbol
illuminates and Start/Pause symbol flashes.
2. Press End Time ‘‘+’’ , ‘‘-’’ buttons to set the
new end time. End Time symbol and Start/
Pause symbol flash while making the new
settings.
3. Press Start/Pause button to complete
setting the new end time. End Time symbol
and Start/Pause symbol flash.
C
When setting the end time again, End Time
symbol turns off and Start/Pause symbol
flashes once the actual programme duration
appears on the display. Programme starts
immediately without any delay if you press
Start/Pause button.
Canceling the time delay
If you want to cancel the time delay countdown
and start the programme immediately:
1. Press “Start/Pause” button for 3 seconds to
cancel the programme.