Beko DCU 7330 X, User Manual

Page: 39 / 44

39 EN
Sensor
There are humidity sensors in your dryer that detect
whether the laundry is dry or not.
To clean the sensor:
1. Open the loading door of the dryer.
2. Allow the machine to cool down if drying has
been carried out.
3. Wipe the metal sensors with a soft cloth,
dampened with vinegar and dry them.
C
Clean metal sensors 4 times a year.
A
Never use solvents, cleaning agents or similar
substances when cleaning since these materials
can cause fire and explosion!
5 Maintenance and cleaning
Filter Cartridge / Door Inner Surface
Lint and fibres released from the laundry to the air
during the drying cycle are collected in the “Filter
Cartridge”.
C
Such fibre and lint are generally formed during
wearing and washing.
C
Always clean the filter and the inner surfaces of
the cover after each drying process.
C
You can clean the filter and filter area by
vacuum cleaner.
To clean the filter:
1. Open the loading door.
2. Remove the cover filter by pulling it up and open
the filter.
3. Clean lint, fibre, and cotton raveling by hand or
with a soft piece of cloth.
4. Close the filter and place it back into its
seat.
C
Clogging may arise on the filter surface after
using your machine for some time; if this
occurs, wash the filter with water and dry it
before using again.
C
Clean the entire inner surface of the cover and
door gasket.