Beko DC 7112 W, User Manual, Page: 25 / 32

Dryer / User Manual
25 / EN
Maintenance and cleaning
7 Maintenance and cleaning
7.1 Filter Cartridge / Door Inner
Surface
Lint and fibres released from the laundry to
the air during the drying cycle are collected in
the “Filter Cartridge”.
C
Such fibre and lint are generally
formed during wearing and
washing.
C
Always clean the filter and the
inner surfaces of the cover after
each drying process.
C
You can clean the filter and filter
area by vacuum cleaner.
To clean the filter:
1. Open the loading door.
2. Remove the cover filter by pulling it up
and open the filter.
3. Clean lint, fibre, and cotton raveling by
hand or with a soft piece of cloth.
4. Close the filter and place it back into its
seat.
C
Clogging may arise on the filter
surface after using your machine
for some time; if this occurs, wash
the filter with water and dry it
before using again.
C
Clean the entire inner surface of
the cover and door gasket.
7.2 Water tank;
The moisture in the damp laundry is taken
from the laundry and condens ed. Drain the
water tank after each drying cycle or during
drying when “Water tank” warning light turns
on.
A
Condensed water is not drinkable!
A
Never take out the water tank
when the programme is running!
If you forget to drain the water tank, your
dryer will stop during the following drying
cycles when the water tank is full and the
“Water tank” warning light will turn on. If this
is the case, press the “Start/Pause/Cancel”
button to resume the drying cycle after
draining the water tank.
*To drain the water tank:
1-Carefully remove the water tank by
opening the kick plate cover/pulling the
drawer.
2-Drain the water in the tank