Beko DBK346XI+, Instructions For Use Manual

Page: 26 / 28

Trouble - shooting
If the appliance does not operate when
switched on, check;
• That the plug is inserted properly in the
socket and that the power supply is on. (To
check the power supply to the socket, plug
in another appliance)
• Whether the fuse has blown/circuit breaker
has tripped/main distribution switch has
been turned off.
• That the temperature control has been set
correctly.
• That the new plug is wired correctly, if you
have changed the fitted, moulded plug.
If the appliance is still not operating at all after
above checks, contact the dealer from whom
you purchased the unit.
Please ensure that above checks have been
done, as a charge will be made if no fault is
found.
GB
Instruction for use
Information concerning the noise
and the vibrations which might
appear during the operation of the
appliance
1. The operation noise can increase during
the operation.
‐ In order to keep the temperatures at the
adjusted temperatures, the compressor of
the appliance starts periodically. The noise
produced by the compressor becomes
stronger when it starts and a click can be
heard when it stops.
‐
The performance and operation features of
the appliance can change according to the
modifications of the temperature of the
ambient environment. They must be
considered as normal.
2. Noises like liquids flowing or as being
sprayed
‐ These noises are caused by the flow of the
refrigerant in the circuit of the appliance and
comply with the operation principle of the
appliance.
3. Other vibrations and noises.
‐
The level of noise and vibrations can be
caused by the type and the aspect of the
floor on which the appliance is placed. Make
sure that the floor does not have significant
level distortions or if it can yield to the weight
of the appliance (it is flexible).
‐
Another source of noise and vibrations is
represented by the objects placed on the
appliance. These objects must be removed
from the appliance
‐ The bottles and the vessels placed in the
refrigerator touching each other. In such
cases move the bottles and the vessels so
that there is a small distance between them.
18