background image

21

Do not use
bleach

Washing
temperature

Can be washed
at centrifugal
machine

Do not wash
centrifugal
machine

Dry on horizantal
surface

Warm iron

Bleach can
be used

Do not machine
wash

Line dry

Descriptions of the international textile care label (ITCL) symbols

60°

No spin

No dry cleaning

You turned the machine on, but the leds are off on
the panel.

Check the grounding on the power cable or a blown fuse.
Check the front door proper closure.

Machine does not take water.

Check the front door for proper closure. Either taps are
closed or water intake filters are clogged.

Taken water is directly discharged.

Check if the discharge hose placed as described in the
users manual or not.

Water coming from beneath the machine.

Check the water intake and drain hoses. Tighten the
connections. The washers of the hoses may be worn out. If
non of the both, the pump filter is not closed properly.

Foam coming out of the detergent dispenser.

Check whether your detergent is suitable for automatic
machines. Next time use less detergent.

Pump does not drain water.

Clean the pump filter. Check whether the drain hose is bent
or not. If there is need to clean the pump filter, refer to the
pump filter cleaning section of the manual.

Chemicals can
be used

Do not wash

Dry clean

P

A

Iron permitted

Do not iron

8

Before calling service

Summary of Contents for D 7081 E

























Reviews: