18
3. Water connections
a) Water inlet hose
Cold water supply
For proper operation, the pressure of water should be between 1 and 10 atm. (1 atm corresponds to
more than 8 liters per minute flow rate at fully open tap.)
To prevent water leaks sealing washers are supplied with the water inlet hose inside the machine,
place these on each of the hose ends and tighten both ends fully.
In order to prevent any water leak damages, keep the water taps closed when not in use. Connect the
cornered end of the hose to the machine water inlet.
Connect the cold water using the hose with blue printing.
2. Feet adjustment
In order for quiet and stable operation, the machine should be placed properly and leveled on its feet.
Your machine comes with two adjustable feet. If the machine is unstable, loosen the plastic counternut
and screw or unscrew the adjustable foot until the machine is leveled perfectly. After positioning,
tighten the counternut for stability.
Summary of Contents for D 7081 E
Page 1: ......
Page 2: ......
Page 6: ...Top lid Control panel Front door Kick plate Kick plate cover 3 Your Washing Machine ...
