Beko CHP 30100 SS, User Manual

Page: 9 / 64

Range Hood / User Manual
9 / 62 EN
3 Technical specifıcations of your appliance
3.1 List of Materials
3.1.1 Parts supplied
Removing the packaging
A
Remove carton carefully, Wear
gloves to protect against sharp
edges.
A
WARNING: Remove the protec-
tive film covering the product before
putting into operation.
•
Hood canopy.
•
Blower.
•
Duct transition.
•
Lamp already installed.
•
Grease filter.
•
Hardware bag with:
–
Use, care and installation guide
–
2 hollow wall anchors with screws to secure
hood to the wall at the bottom
–
4 Wood screws to secure the wood support
to the wall
–
4 Phillips head screws to secure the transition
to the hood outlet on the top
–
6 Phillips head screws to secure hood to the
wood support (2 secured to wood support)
–
1 Safety screw and lock washer to secure
the blower (screw is marked with red or blue
paint)
–
2 Flat washers for wall anchors
3.1.2 Parts not supplied
Optional Accessories
•
Duct Cover
•
Heat Lamps kit (2 IR 175W)
•
Backsplash kit
Tools/Materials required
•
Wire nuts
•
Tape to mount template
•
8” rounded metal duct length to suit installation
•
Measuring tape
•
Pliers
•
Gloves
•
Knife
•
Safety glasses
•
Electric drill with 5/16” and 3/8” Bits
•
Strain relief
•
Spirit level
•
Duct tape
•
Screwdrivers:
–
Phillips (Posidrive) # 2
–
Torx # 2
•
Wire cutter/stripper
•
Masking tape
•
Hammer
•
Saw, jig saw or reciprocating saw
CHP30100SS
Operating mode
ducted out only
Max. Ventilation
Capacity
515 CFM
Nr.of Speeds
4
Controls
Mechanical Knobs
Lights
2 x 50 W Halogene
Filtering
2 x Baffle Filters
Volts
120 V
Frequency 60 Hz
Total Power
(motor + lamps)
550 W
Plug type
Hard Wire
Required dis-
tance above
cooktop
30” (gas cooktop)
30” (electrical cooktop)