Beko CHP 30100 SS, User Manual

Page: 14 / 64

14 / 62 EN Range Hood / User Manual
4 Installing your appliance
23 9/16 “ 48”
20 9/16” 42”
17 9/16 36”
14 9/16” 30”
4.3.1 Install Transition Onto
Top of Hood
A
IMPORTANT: Remove shipping
tape from damper and check that
damper moves freely.
•
Place the transition piece over the hood exhaust
and secure with 4 screws provided.
•
Use duct tape to seal the connection. Check to
be sure the damper moves freely.
4.3 2 Mount hood onto ceiling
or cabinet
C
If mounting to the underside of a
cabinet with a recessed bottom,
install shims to fill the gap.
•
Drive mounting screws into the studs until
they protrude 1/4”. The 1/4” gap will provide
clearance to engage the keyhole slots in the top
of the hood.
•
Lift hood to installation position. Locate house
wiring and route trough the knockout (from the
back or top of the hood).
•
Lift hood onto mounting screws. Slide back
against the rear wall.
•
Tighten mounting screws.
A
IMPORTANT: For additional
support and to minimize vibration
during operation, the hood must be
secured to the back wall. Use wall
anchors to fasten bottom back of
hood to the wall.