Beko CFB 9433 X, User Manual

Page: 5 / 51

Hood / User Manual
5 / EN
•
The minimum distance between
the supporting surface for the
cooking vessels on the hob and
the lowest part of your product
must be at least 65 cm.
•
If the instructions for installation
for the gas hob specify a grea-
ter distance, this has to be taken
into account.
•
Make sure that your mains
power supply complies with the
information supplied on the ra-
ting plate of the appliance.
•
Never use the appliance if the
power cable or the appliance it-
self is damaged.
•
Prevent damage to the power
cable by not squeezing, bending,
or rubbing it on sharp edges.
Keep the power cable away from
hot surfaces and naked flame.
•
Use the appliance with a groun-
ded outlet only.
WARNING:
Do not connect the
appliance to the mains until the
installation is fully complete.
•
Place the appliance in a way so
that the plug is always accessible.
•
Do not touch the lamps if they
have operated for a long time.
They can burn your hands since
they will be hot.
•
Follow the regulations set out by
competent authorities on disc-
harge of the exhaust air (this
warning is not applicable for use
without flue).
•
Operate your appliance after
putting a pot, pan etc. on the
hob. Otherwise, high heat may
cause deformation in some parts
of your product.
•
Turn off the hob before taking
the pot, pan etc. from it.
•
Do not leave hot on the hob.
Pans with hot may cause self
combustion.
•
Pay attention to your curtains
and covers since may catch fire
while cooking food such as fries.
•
Grease filter must be cleaned
at least monthly. Carbon filter
must be replaced at least every
3 months.
1
Important safety and environmental instructions