TRANSPORTATION INSTRUCTIONS
1. The appliance should be transported only in a vertical upright position.
The packing as supplied must be intact during transportation.
2. If during the course of transport the product has been transported horizontally, it
must only be laid on its left hand side (when facing the lid front) and it must not
be operated for at least 12 hours to allow the system to settle after the appliance
is brought back to upright position.
3. For the protection of the appliance during warehousing and transport, it is
provided with spacers between the lid and the cabinet (in the front and rear
side). These spacers will be removed before putting the appliance into
operation.
4. Failure to comply with the above instructions could result in damage occuring to
the appliance. The manufacturer will not be held responsible if these instructions
are disregarded.
5. The appliance must be protected against rain, moisture and other atmospheric
influences.
IMPORTANT :
Care must be taken while cleaning / carrying the appliance to avoid
touching the condenser metal wires at the back of the appliance, as you might
injure your fingers and hands or damage your product.
IMPORTANT :
This appliance is not designed for stacking with any other appliance.
Do not attempt to sit or stand on top of your appliance as it is not designed for such
use. You could injure yourself or damage the appliance.
IMPORTANT :
Make sure that mains cable is not caught under the appliance
during and after carrying / moving the appliance, to avoid the mains cable
becoming cut or damaged.
”
IMPORTANT :
Excess deposit of ice on the frame and the baskets should be
removed regularly with the plastic scraper provided. Do not use any metal parts to
remove the ice.
The presence of this ice build-up makes impossible to close the lid correctly.
When positioning your appliance take care not to damage your flooring, pipes, wall
coverings etc. Do not move the appliance by pulling by the lid or handle. Do not
allow children to play with the appliance or tamper with the controls. BEKO plc.
declines to accept any liability should the instructions not be followed.
3
