PROBLEM SOLVING/TROUBLE SHOOTING
If the appliance does not operate when switched on, check;
The plug is inserted properly in the socket and that the power supply is on. (To check the
power supply to the socket, plug in another appliance)
The fuse has blown / circuit breaker has tripped / main distribution switch has been
turned off.
The temperature control has been set correctly.
New plug is wired correctly if you have changed the fitted moulded plug. If the appliance
is still not operat
ing after the above checks, please refer to the section on “How To
Obtain Service”.
Please ensure that above checks have been made as a charge will be made if no fault is
found.
REPLACING THE INTERIOR LIGHT BULB
If the lamp burns out, disconnect the ap pliance from the mains. Take out
the lamp trim. Make sure the lamp is screwed correctly. Plug in the
appliance again. If the lamp still does not go on, replace it with another
one model E14-15W . Mount back the lamp trim in its place.
10
