Beko CEG 3190 B, User Manual

Page: 28 / 348

28 / EN
Fully Automatic Coffee Maker / User Manual
6 Troubleshooting
Problem Cause Solution
The appliance does not work. The appliance is not connected
to the mains.
Plug in and press the switch.
Check the cable and the Plug
No or delayed response in
several trials of pressing on
function key on the panel
Appliance is under an
electromagnetic interference
Dirt over the panel
Unplug the appliance. Restart
after few minutes
Clean the panel with the cloth
provided
The coffee is not hot enough. The cups have not been
preheated.
The brewing unit is too cold.
Rinse the appliance at least
3 times before making the
coffee.
The coffee cannot come out
from spout.
Empty system function maybe
used before.
Press the hot water button
until water can come out from
spout.
The first cup of coffee is poor
quality.
The first run of grinder does
not pour sufficient quantity
coffee power into the brewing
unit.
Throw the coffee away. The
other coffees will always be of
good quality.
Coffee has no cream. Not pressing the touch
button from the front
direction of the appliance
Press the lower bottom part of
the icon of
the touch button from the
front direction of the appliance.
The touch buttons are not
sensitive
Excessive scale has built up. Descale the appliance.
The water tank is removed
/ the water level is very
low in the water tank but
have no alert.
The area near the water tank
connector is wet.
Wipe the water around the
water tank
connector
Internal drip tray is filled with a
lot of water.
Coffee powder too fine which
block the water to come out.
Adjust the coffee fineness
to bigger dot during grinder
operation.
Coffee is delivered too slowly
or a drop at a time.
Coffee powder too fine which
block the water to come out.
Adjust the coffee fineness
to bigger dot during grinder
operation.