Remote controller / User Manual
7 / 24 EN
4. HEAT button
•
Press this button to enter HEAT mode.
5. COOL button
•
Press this button to enter COOL mode.
6. SPEED button
•
Press this button, you can select the fan speed as follows:
Low
Mid
High
Auto
(Auto)
C
Note:
Auto air speed is not available in Fan mode.
7. + & - button
•
Each time the “ + “ is pressed, the temperature setting will increase by 1 °C and each time the “ - “ is
pressed, it will decrease by 1°C.
•
The temperature setting ranges from 16°C (60°F) - 32°C (90°F).
C
Note:
The temperature cannot be set in Auto or Fan mode.
8. °C & °F button
•
Press °C & °F Button to switch the display of degrees Celsius and degrees Fahrenheit on the screen.
9. SWING button
•
Press this button to activate up/down swing and press it again to fix the swing position.
10. SLEEP button
•
When the unit is on, press sleep mode button , which will activate (deactivate) the function of sleep
mode.
•
The unit will exit SLEEP mode after 10 hours of continuous operation and restore to the previous
status.
C
Note:
The SLEEP function cannot be activated in FAN and AUTO mode. In the sleep
mode, the screen of the air-conditioner is off.
2
Buttons description
