6 / 24 EN
Remote controller / User Manual
2
Buttons description
COOL
SPEED
HEAT
TIMER
MODE
°C/°F
ON/OFF
SWING
SLEEP
MODE
1
9
7
3
2
8
6
5
4
10
C
Note:
The remote controller display all symbols during power-on and only those
corresponding to current operation the rest of the time.
1. ON/OFF button
•
Press this button to turn on/off the unit.
•
This will clear the existing timer and SLEEP settings.
2. MODE button
•
Press this button, you can select the running mode as follows:
AUTO
COOL
DRY
HEAT
FAN
C
Note:
HEAT mode is not available for cool only units.
3. TIMER button
•
With the unit ON, press this button to set OFF timer or with it OFF to set ON timer.
•
Press this button once, a “ON (OFF)” will flash. Press “+“ or “-“ to set the number of hours in which
the unit will be turned ON/OFF, with an interval of 0.5 hour , and a range of 0.5-24 hours.
•
Press it again to confirm the setting, the “ON(OFF)” will stop flashing.
•
If the timer button is not pressed longer than 10 seconds after the “ON (OFF)” start flashing, the
timer setting will be exited.
•
If a timer setting is confirmed, pressing this button again will cancel it.
