Mobile room air conditioner / Installation Manual
23 / 88 EN
SWING
TIMER
SLEEP
MODE
FAN
SPEED
FILTER
RESET
3.1 TEMP. indicator
In cooling or heating mode, when or button is pressed, the setting temperature is displayed and
be adjusted.
1. In auto, cool and heat mode, TEMP.indicator display is setting temperature.
2. In dry and fan mode, TEMP.indicator display is room temperature.
3.2 Function buttons
1. button — Press this button to make the unit run or stop.
2. button
a. The running time of the unit has reached 250 hours, the filter reset indicator light will illuminates,
and it means the air filter should be cleaned.
After cleaning, you can press the “ “ button, the filter reset indicator light will turns off and the
running time will be cleared.
b. If you do not press the “ “ button when the filter reset indicator light illuminates, the indicator
light will always illuminates except the unit is power off.
3. button — Press this button, you can select the fan speed as follows:
auto
hi
med
low
The fan speed indicator light illuminates under the different fan speed.
C
Note:
In fan mode,do not have auto fan speed
.
4. or button
a. Each time the or button is pressed, the setting temperature will increase or decrease by
1°C (1°F). The setting temperature ranges from 16°C (60°F)-32°C(90°F).
b. By pressing both the and button at the same time (≥3s), the display will toggle between
Celsius and Fahrenheit.
3
Control panel
