36 / 101 EN
Local Air-conditioner / User Manual
Check up whether the exhaust hose has been mounted properly.
Cautions for cooling and dehumidifying operations:
- When using functions on cooling and dehumidifying, keep an interval of at least 3 minutes
between each On/Off.
- Power supply meets the requirements.
- The socket is for AC use.
- Do not share one socket with other appliances.
- Power supply is AC220--240V, 50Hz
6.2 Cooling operation
- Press the “Mode” button till the “Cool” icon appears.
- Press the “Down” or “Up” button to select a desired room temperature. (16°C-31°C)
- Press the “Wind” button to select wind speed.
6.3 Dehumidifying operation
- Press the “Mode” button till the “Dehumidify” icon appears.
- Automatically set the selected temperature to current room temperature minus 2°C. (16°C-31°C)
- Automatically set the fan motor to Low wind speed.
6.4 Fan operation
- Press the “Mode” button till the “Fan” icon appears.
- Press the “Wind” button to select wind speed.
6.5 Heating operation (this function is not available for
a cold- single unit)
- Press the “Mode” button till the “Heat” icon appears.
- Press the “Down” or “Up” button to select a desired room temperature. (16°C-31°C)
- Press the “Wind” button to select wind speed.
6.6 Timer operation
Timer On setting:
- When the air-conditioner is Off, press the “Timer” button and select a desired On time through the
temperature and time setting buttons.
- “Preset On Time” is displayed on the operation panel, after setting time 5 seconds, ‘set temperature’
will be shown on both display.
- On time can be regulated at any time in 0-24 hours.
6
Operation introduction
