8
Important Steps For Baking Success
4
1. Place the baking pan with the
kneading hook in the machine.
2. Place the ingredients in the baking
pan in the following order:
• Flour/meal
• Water/ milk
• Butter/margarine
• Sugar
• Salt
Yeast
3. Close the lid and put the plug in
the outlet. Now 0:00 will appear on
the display.
4. Press the selector and choose the
desired colour of the crust.
5. If you wish to use the timer func-
tion, you can set it now.
6. Press the start button.
7. After the 1st beep the ingredients
can be added.
8. The second beep indicates that
the baking process is finished.
9. Remove the baking pan from the
breadmaker and after one minute
remove the bread from the pan
and allow to cool on a rack. BE
CAREFUL! The bread pan and the
bread are hot. Use oven gloves.
10. Switch off the appliance and
remove the plug from the outlet.
H:HH
H:HH appears on the display when
the temperature in the breadmaker is
still too high for the new program.
You will also hear a beep.
U.K. Wiring Instructions
The wires in the mains lead are
coloured in accordance with the fol-
lowing code:
BLUE = NEUTRAL, BROWN = LIVE,
GREEN-YELLOW = EARTH
As the colours of the wire in the
mains lead of this appliance may not
correspond with the colour markings
identifying the terminals on your plug,
proceed as follows:
The wire which is coloured BLUE
must be connected to the terminal
which is marked with the letter N or
coloured black.
The wire which is coloured BROWN
must be connected to the terminal
which is marked with the letter L or
coloured red.
The wire which is coloured GREEN-
YELLOW must be connected to the
earth terminal which is marked with
the letter E or or coloured green
and yellow.
With this appliance, if a 13 amp
plug is used a 13 amp fuse should
be fitted. If any other type of plug is
used a 15 amp fuse must be fitted
either in the plug or at the distribution
board.
