4
EN
Juice extractor quickly extracts the
juice and dregs of hard fruits. First
wash and clean the fruits to be
squeezed and cut them into pieces
at sizes that can be pushed into the
food channel.
This appliance is equipped with
safety switches which will prevent
the user to operate the appliance
unintentionally while it is not installed
completely.
Preparation for Operation
Before the initial operation, wash
those parts of the appliance that will
touch fruits in lukewarm detergent
water.
Installation Order
Place the strainer container on the
motor unit.
Place the strainer on the gripper and
press until it is fully seated. Attach
the liquid collector part in the place
of liquid draining duct on the strainer
container downwards from the top
as to enter into the tab slot.
Place the transparent cover on the
strainer container by aligning the pin
with the hole.
Push the lock lever to fit it into its
slot on the transparent cover.
Make sure that the pin enters into
the body housing by slightly bending
and pushing the dregs container
forward to place it under the
transparent cover.
By arranging the channel on the
pusher to the channel on the food
housing, slide the pusher. Place
the liquid container under the liquid
draining hole for fruit juice before
operating the appliance. Plug in and
move the on/off switch to "I" position
to start the appliance.
Using your Appliance
3
