14 /36 EN
Refrigerator / User Manual
4
Preparation
4.2 Recommendations for the
fresh food compartment
•
Do not allow the food to touch the temperature
sensor in fresh food compartment. To allow the
fresh food compartment keep its ideal storage
temperature, sensor must not be hindered by
food.
•
Do not put hot food and beverages inside the
product.
4.1 Things to be done for
energy saving
A
Connecting the product to electric energy
saving systems is risky as it may cause
damage on the product.
•
Do not leave the doors of your refrigerator open
for a long time.
•
Do not put hot food or drinks in your
refrigerator.
•
Do not overload the refrigerator. Cooling
capacity will fall when the air circulation inside
is hindered.
•
Do not place the refrigerator in places subject
to direct sunlight. Install the product at least
30 cm away from heat sources such as hobs,
ovens, heater cores and stoves and at least 5
cm away from electrical ovens.
•
Pay attention to store your food in refrigerator
in closed containers.
•
You can load maximum amount of food to the
freezer compartment of the refrigerator by
removing the freezer compartment shelf of
drawer. Declared energy consumption value
of the refrigerator was determined with the
freezer compartment shelf or drawer removed
and with maximum amount of food loaded.
There is no risk in using a shelf or drawer
suitable for the shapes and sizes of the foods
to be frozen.
•
Thawing frozen food in fridge compartment will
both provide energy saving and preserve the
food quality.
C
The ambient temperature of the room
where you install the refrigerator should
at least be
10
º
C /50°F
. Operating your
refrigerator under cooler conditions than
this is not recommended.
C
Inside of your refrigerator must be cleaned
thoroughly.
C
If two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.
