Mobile type air conditioners (local air conditioners) / User Manual
19 / 28 EN
26.5 ~ 48.0
Fig. 13
Fig. 12
Fig. 14
Fig. 15
Foam seal A
(adhesive type)
Window
panel
Foam seal
7.2.2 Installation in a sliding sash
window
1. Cut the foam seal (adhesive type) to the proper length
and attach it to the window frame. See Fig. 12.
2. Attach the window slider kit to the window stool. Adjust
the length of the window slider kit according to the
width of window, shorten the adjustable window kit if
the width of window is less than 26.5 inches.
Open the window sash and place the window slider kit
on the window stool. See Fig. 13.
3. Cut the foam seal (adhesive type) to the proper length
and attach it on the top of the window. Shown as in
Fig. 14.
4. Close the sliding sash securely against the window.
5. Cut the foam seal to an appropriate length and sea
the open gap between the top window sash and outer
window sash. Shown as in Fig. 15.
C
Note:
All the illustrations in this manual
are for explanation purpose only.Your unit
may be slightly different. The actual shape
shall prevail.
7
Installation instructions (optional)
