Inspection and maintenance
8
Service-Unit BEKOMAT® 31U / 31U F
Note:
It is imperative to observe all hazard statements and warnings listed here.
Please also observe all regulations and notes regarding industrial safety and fire prevention at the place
of installation.
As a matter of principle, only use suitable and appropriate tools and materials in a proper condition.
Do not use aggressive cleaners and improper devices such as high-pressure cleaners.
Please note that condensates may contain aggressive or harmful components. Therefore, skin contact
should be avoided.
Condensate is subject to mandatory waste disposal. As such, it must be collected in suitable containers,
and disposed of or processed properly.
Pos : 28 /Beko T ec hnis che D okument ati on/Wart ung/ BEKOM AT/ Wart ung BM 31U /32U Ser vic e-Uni t @ 5\ mod_1358510276825_2901. doc x @ 30412 @ @ 1
1.
Prior to the replacement of the service unit,
a reset needs to be carried out.
The control unit is released by actuating the
arresting hook.
When removed, the TEST button below the LED
must be pressed and held for at least five seconds.
2. Unfasten the BEKOMAT
®
31U from the outlet (3).
3. Detach the service unit (5) from the tubing at the
inlet.
Missing numbers are constituents of the BEKOMAT
®
stand-alone model.
1
2
3
4
5
6
7
8
9
10
