12
I
EN
To stop the process at any given time, please
press the
M
button. The Program Table, which will
allow you to sort the channels as you wish, will be
displayed after the automatic search is complete.
6.2.2-Manual tuning of channels and
storing in the memory
6.2.2.1-If you already know the
channel number
Press the
M
button. Move to the
SETUP
menu
by pressing the Down movement button in Main
Menu and confirm your selection with
OK
button.
The Setup menu is displayed.
SETUP
SYSTEM
BG
CHANNEL
S06
FINE TUNE
0
SEARCH
◄ ►
PROGRAM NO
P13
STORE
AUTOPROGRAM
CHANGE
BACK
Select the system in which you would
like to make the search from the
SYSTEM
tab. Move into
CHANNEL
tab
by pressing the down movement button.
Press
OK
on your remote control to
select
“S”
for cable channels and
“C”
for channels received via the antenna.
Move onto the
PROGRAM
NO
tab
and using the number buttons enter the
channel number in which you would
like to have the channel stored. If the
broadcast viewed on the screen is of
your desired quality, first move onto the
STORE
tab with the down movement button to
store in the memory the selection you have made
and store the channel by pressing the
Left
or
Right
movement buttons. The prompt
STORED
will be displayed briefly. The channel will be stored
according to the program number of your choice.
You can tune and store in memory other channels
the same way. In the event that you wish to exit
the channel settings menu for any reason, simply
press the
EXIT
button.
6.2.2.2-If you do not know the
channel number
Press the
M
button. Move to the
SETUP
menu by pressing the
down
movement
button in Main Menu and confirm your
selection with
OK
button. The Setup
menu is displayed. Select the system
in which you would like to make the
search from the
SYSTEM
tab. Move into
CHANNEL
tab by pressing the down
movement button. Press
OK
on your
remote control to select
“S
” for cable
channels and
“C”
for channels received
via the antenna. Select
SEARCH
tab using the
up/
down
movement buttons, and scan the channels
in ascending order with
Right
movement button
and in descending order with
Left
movement
button. If the channel that is found is of your liking,
select the
STORE
tab. Then store it in the memory
by pressing the
Right
or
Left
movement buttons.
Repeat the same procedure for other channels by
selecting the program number of your choice from
the
PROGRAM NO
tab. If the channel you found
is not of the desired quality and requires Fine
Tuning or if you would like to rename the channel,
refer to the relevant sections.
6.2.3-Fine Tuning
If the channel you found is not of the
desired quality and requires
Fine
Tuning
, then select the
FINE TUNE
tab
by pressing the
Down
movement button
in the
SETUP
menu. Using the
Left/
Right
movement buttons on your remote control,
adjust the broadcast displayed on the screen to
your desired quality. Under normal circumstances,
you will not require to use the Fine Tune function.
The AFC values of your television will automatically
adjust and lock themselves to the channel.
However, you might need it in case the television
transmitters do not operate according to the
standards. To store in the memory, the settings
you have made, select the
STORE
tab and press
the
Right
or
Left
movement button.