Beko BEKOMAT 32, User Manual, Page: 11 / 28

10 I
EN
6.1.4-Temporary sound mute (MUTE)
To temporarily mute the sound of your
television, press the MUTE button on
your remote control. In that case, MUTE
symbol will appear on the screen. When
you press the same button a second
time, the sound will be restored. If you
press the
VOL+
button while in the Mute
mode, the sound level is increased and the Mute
function is aborted.
6.1.5-Returning to Selected Program
(SWAP)
Allows you to switch between the current
program you watch and the last selected
program. For example, if you change
the channel to Program 11 while you
were watching Program 1, press SWAP
button to switch back to Program 1. Press SWAP
button to switch back to Program 11 again.
6 Performing the initial power-on settings
6.1-TV controls
6.1.1-Temporary on/off (STAND-BY)
When you press the red POWER button
located on the upper left hand side of
your remote control while your television
is switched on, the sound and the
picture will go off. In the stand-by mode,
the power indicator of your television will
glow brighter. To switch your television
back on, either press any numeric button
or PR+/PR- buttons.
6.1.2-Channel Selection
You may select whichever program
number you would like by pressing
the PR+/PR- buttons located on your
television and your remote control. To
select the programs that are above 9,
you can use the Numerical buttons.
You may enter the number of the
program you would like to select using
the numerical buttons. For example, to
switch to the program number 12, press
respectively the numeric buttons 1 and
2 on your remote control. You can perform the
program selection also from the Program Table.
6.1.3-TV and AV Mode Selection
Press the AV button on your remote
control.
SOURCE
menu will be
displayed. Select
TV
or desired
AV
mode from the Source menu with
Up/
Down movement buttons and confirm
with OK button so that your television
will switch to the source you have
selected.
6.1.6-Main Menu
Press the M button. The Menu including all the
setting menus will appear on the screen. Navigate
through the Menu titles with the Up / Down
movement buttons and press the
OK
button to
select the desired menu. If you want to exit the
menu in any step, just press the
EXIT
button.
Press o or M buttons to return to the previous
Menu while you are in a sub menu.
MAIN MENU
VOLUME
PICTURE
PROGRAM TABLE
SETUP
FEATURES
SELECT
EXIT
POWER
MUTE