Beko BDP710MG, User Manual

Page: 14 / 32

14 / EN
Dryer / User Manual
Installation
Connecting the water drain hose
1-2
Pull hose at the behind of the dryer
by hand in order to disconnect it from
where it is connected. Do not use any
tools to remove the hose.
3
Connect one end of the drain hose
supplied with the dryer to the
connection point from where you
removed the hose of the product in
previous step.
4
Connect the other end of the drain hose
directly to the wastewater drain or to
the washbasin.
1
3 4
2
A
Hose connection should be made
in a safe manner. Your drain
house will be flooded if the hose
comes out of its housing during
water discharge.
C
Water drain hose should be at-
tached to a height of maximum
80 cm.
C
Make sure that the water drain
hose is not stepped on and it is
not folded between the drain and
the machine.
3.4 Adjusting the feet
• In order to ensure that the dryer
operates more silently and vibration-
free, it must stand level and balanced
on its feet. Balance the machine by
adjusting the feet.
• Turn the feet to left or right until the
dryer stands level and firmly.
C
Never unscrew the adjustable
feet from their housings.
3.5 Electrical connection
For specific instructions for electrical connec-
tion required during installation (see 1.1.1
Electrical Safety)
3.6 Transportation of the dryer
Unplug the dryer before transporting it.
Drain all water that has remained in the
dryer.
If direct water drain connection is made, then
remove the hose connections.
A
We recommend carrying the dryer
in upright position. If it is not pos-
sible to carry the machine in the
upright position, we recommend
carrying it by tilting towards the
right side when looked from the
front.