background image

EN / 43

Self-repair can be done by the end-user
with regard to the following spare parts:
door, door hinge and seals, other seals,
door locking assembly and plastic peripher-
als such as detergent dispensers (an up-
dated list is also available in 

sup-

port.beko.com

 as of 1st of March 2021)

Moreover, to ensure product safety and to
prevent risk of serious injury, the mentioned
self-repair shall be done following the in-
structions in the user manual for self-repair
or which are available in 

support.beko.com

For your safety, unplug the product before
attempting any self-repair.
Repair and repair attempts by end-users for
parts not included in such list and/or not
following the instructions in the user manu-
als for self-repair or which are available in

support.beko.com

 , might give raise to

safety issues not attributable to 

sup-

port.beko.com

 , and will void the warranty

of the product.
Therefore, it is highly recommended that
end-users refrain from the attempt to carry
out repairs falling outside the mentioned

list of spare parts, contacting in such cases
authorized professional repairers or re-
gistered professional repairers. On the con-
trary, such attempts by end-users may
cause safety issues and damage the
product and subsequently cause fire, flood,
electrocution and serious personal injury to
occur.
By way of example, but not limited to, the
following repairs must be addressed to au-
thorized professional repairers or re-
gistered professional repairers: motor,
pump assembly, main board, motor board,
display board, heaters etc.
The manufacturer/seller cannot be held li-
able in any case where end-users do not
comply with the above
The spare part availability of the washing
machine or washer-dryer that you pur-
chased is 10 years. During this period, ori-
ginal spare parts will be available to oper-
ate the washing machine or washer-dryer
properly.

Summary of Contents for B5W58410AW













































Reviews: