Beko ATP 6100 I, Instruction Manual

Page: 7 / 120

6 / EN Air purifier/ Instruction Manual
life. Used device must be returned
to offical collection point for recy-
cling of electrical and electronic
devices. To find these collection
systems please contact to your
local authorities or retailer where
the product was puchased. Each
household performs important role
in recovering and recycling of old
appliance. Appropriate disposal
of used appliance helps prevent
potential negative consequences
for the environment and human
health.
1.3 Compliance with
RoHS Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.
1.4 Package Informa-
tion
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations. Do not
dispose of the packaging materials
together with the domestic or oth-
er wastes. Take them to the pack-
aging material collection points
designated by the local authorities
.
1 Important Safety and Environmental Instructions
1.5 Cleaning And Main-
tenance
1. Turn the air purifier off and un-
plug it before cleaning.
2. The outside of the air purifier can
be cleaned with a soft, clean damp-
ened cloth.
3. The air outlet and air inlet grill can
be cleaned of dust with a small, soft
brush.
4. If you wish to clean the inside of
the air purifier, please only use a
dry, soft cloth to wipe it down.
5. Wash the Pre-filter by following
the operation described in the sec-
tion of “VACUUM OR WASH THE
PRE-FILTER”.
6. Do not wash the HEPA filter.
A
WARNING: Do not allow mois-
ture to come in contact with
the body of the air purifier.
Air purifier/ Instruction Manual
7 / EN
1 Important Safety and Environmental Instructions
Groove
Fastener
Fig.1
1.6 Vacuum Or Wash
The Pre-filter
Occasionally vacuum the exterior of
the fabric pre-filter to remove dust.
Always unplug the unit before re-
moving the fabric pre-filter.
1. Carefully rotate the body anti-
clockwise and remove it from the air
inlet grill.
2. Remove the pre-filter from the
HEPA filter.
3. Wash the pre-filter in the wash-
ing machine.
4. After the pre-filter is cleaned well
and dried, attach the pre-filter onto
the HEPA filter.
5. Carefully put the HEPA filter with
pre-filter into the air inlet grill.
6. Put the body onto the air inlet
grill, then rotate the body clockwise
until the fastener locks into the
groove.
Air purifier/ Instruction Manual 7 / 120 EN