EN
19
Water Dispenser
(in some models)
Water dispenser is a very useful
feature based on reaching cold water
without opening the door of your
refrigerator. As you will not have to
open your refrigerator door frequently,
you will have saved energy.
Filling the water dispenser's tank
Water tank filling reservoir is located
inside the door rack. Open the
reservoir cover and fill in clean potable
water. And then, close the lid.
Using the water spring
Push the arm of the water dispenser
with your glass. The dispenser will
cease operating once you release the
arm.
When operating the water dispenser,
maximum flow can be obtained
by pressing the arm fully. Please
remember that the amount of flow
from the dispenser is subject to the
degree you press the arm.
As the level of the water in your
glass/container rises, slightly lessen
the pressure on the arm to prevent
the overspill. If you slightly press the
arm, the water will drip; this is quite
normal and not a failure.
Warning!
• Do not fill the water tank with
any other liquid except for water
such as fruit juices, carbonated
beverages or alcoholic drinks which
are not suitable to use in the water
dispenser. Water dispenser will
be irreparably damaged if these
kinds of liquids are used. Warranty
does not cover such usages. Some
chemical substances and additives
contained in these kinds of drinks/
liquids may damage the water tank.
• Use clean and pure potable water
only.
Summary of Contents for ASML142B
Page 1: ...CFMD7852X ASML142B EN ...
