11 / 41EN
Refrigerator / User Manual
Installation
A
WARNING:
Secure the water
hose to suitable points by means
of the clips supplied to avoid
any damage or displacement or
accidental disconnection.
A
WARNING:
After turning on the
water valve, make sure that there
is no leakage at both connection
points of the water hose. If there
is a leakage, turn off the valve
immediately and tighten all joints
again using a spanner or a pliers.
A
WARNING:
Make sure that
standard 1/2" valve connector is
available and completely turned
off on your cold water mains line.
3.10. Water filter
(This feature is optional)
Your refrigerator may be equipped with
an external or internal filter depending
on its model. To fit the water filter,
follow the instructions below referring
to the figures supplied:
3.11. Mounting
the external filter
onto the wall
ASP341 models only
1.
First, determine the location to mount
the external filter.
2.
Then, determine the distance between
the filter and the tap and filter and the
water inlet respectively. Prepare hoses
at required lengths.
3.
Mount the filter connection kit onto the
wall by using a screwdriver and attach
the filter.
B
WARNING:
Water filter must
be held upright as shown in the
figure. It is critical to connect the
water inlet and outlet hoses on
the filter correctly.
