Beko 8700000649 Service Manual Download Page 32

Page: 32 / 53

BEKO THAI NF 60 CM BOTTOM FREEZER REFRIGERATORS

09.03.2020 / REV NO: 01

Sensitivity: Public

9.6. Refrigerator is Working Too Loud

YES

Fresh food compartment

temperature is set to a really low

temperature.

The temperature of the Fresh

food compartment is too low but

the temperature of the Freezer

compartment is sufficient.

Adjust the temperature

of the freezer

compartment to a

higher value and

check the status again.

YES

Seal should be inspected

and the gas flow system
shall be checked for any

obstructions or leakages.

Problem is

solved.

The temperature of the freezer

compartment is too low but the

temperature of the Fresh food

compartment

is sufficient.

Freezer compartment

temperature is set to a really low

temperature.

Adjust the temperature

of the Fresh food

compartment to a

higher value and

check the status again.

Seal should be inspected

and the gas flow system

shall be checked for any

obstructions or leakages.

Refrigerator is

working too

loud

Summary of Contents for 8700000649






















































Search results

Summary of Contents for 8700000649

Reviews:

Related manuals for 8700000649

Brands by name

Popular brands

Beko 8700000649, Service Manual

Search results

Summary of Contents for 8700000649

Reviews:

Related manuals for 8700000649

Brands by name

Popular brands