background image

20

      Installation

If your system is not ready, let a certified plumber make it 

ready.  
1.  Removing the transportation locks

Before the washing machine is operated, the transit bars 

must be removed! In order to do this:

1. Loosen “C” bolts by rotating them counter clockwise with 

a suitable spanner 

2. Remove transportation locks by turning. 

3. Place “P” plastic covers onto the openings of transporta-

tion locks by rotating in direction of arrow and pushing. 

Attention please! Store the transit bars for using when 

machine is to be transported again. Always transport your 

machine with transportation locks. 

2. Leveling the feet

Or order to operate your machine without noise and 

vibration it must be properly on balance. Four feet of your 

machine can be adjusted. First loosen plastic counter bolt. 

Tighten the counter bolt after adjusting the feet for leveling 

your machine.

3. Water Connections 

a) Water Inlet Hose 

Your machine is connected to water supply by special 

hoses supplied by the machine. Red hose or hose written 

red on it is hot water inlet, blue hose or hose written blue 

on it is cold water inlet.

There plastic seal (4 for double water inlet models, 2 

for single water inlet models) on hose or plastic bag for 

eliminating any leakage in connections points. These seals 

must be used on each side of the connection. Seals on 

machine side must be connected filter cannal.

6

Summary of Contents for 5102 B

























Reviews: