28
9.7.1-PC Connection:
Connect the D-Sub15 connector to the PC-IN socket at the back of your television
by using an appropriate cable (not supplied with your television). Again, by using
an appropriate cable, connect the audio output of your PC to the PC AUDIO-IN at
the back of your television to listen to sounds from your PC and you can adjust the
volume level of your source by using
VOL+/VOL-
buttons.
9.7.2-Switching to the PC mode
For your LCD-TV to switch to the monitor (PC) mode, press the
AV
button on your
remote control.
SOURCE
menu will be displayed. Select
PC
option by pressing the
Up/down
movement buttons and press the
OK
button.
9.7.3-PC Setting
Enter into the
Setup
menu from the main menu by pressing the
MENU
button in
the PC mode. In order to make the necessary settings in this menu, you can select
the tabs with the
up/down
buttons on your remote control to make the following
relevant settings.
9.7.4-AUTOCONFIGURATION
The most suitable geometric settings in accordance with the entry mode are
configured by this function. For this operation, just select the
Autoconfiguration
tab and press
OK
button.
9.7.5-HORIZONTAL POSITION:
Horizontal position setting.
9.7.6-VERTICAL POSITION:
Vertical position setting.
9.7.7-CLOCK FREQUENCY:
This is the pixel clock frequency. User can narrow
down or enlarge the display by selecting a desired value.
9.7.8-PHASE:
Using the
right/left
movement buttons, you can ensure that the
colours and shapes are exactly consolidated on the PC image.
9.7.9-PICTURE FORMAT
You can select the PC image to be displayed in 16:9 or 4:3 formats.
9.7-PC VGA connection
Rear view of TV
Picture connection
Sound connection
