Beko 22WLP530HID, Operating Instructions Manual, Page: 16 / 32

14
6.4-Performing Analog
Tunings
You can either tune the Analog channels
automatically or manually and store them in
your television.
6.4.1-Automatic tuning of channels
and storing in the memory
Note: If your television does not receive any
antenna broadcast for a period of 5 minutes,
it automatically switches to the stand-by
position. The countdown OSD is displayed
on the screen during the last 1 minute
(applicable for Analog mode only)
You can tune the programs automatically
with the Autoprogram function of your
television and then sort the channels as you
desire by means of the Program Table. Press
AV button on your remote control, select
ANALOG tab from the SOURCE menu by
using Up/Down movement buttons and
confirm by pressing the OK button. Your
TV will switch to Analog mode. Press the
MENU button on your remote control. Select
SETUP tab with Down movement button
and confirm with
OK
button. Setup menu is
displayed.
MENU
COUNTRY SELECTION
BELGIUM
CZECH REP.
DANMARK
DEUTSCHLAND
ELLADA
ESPANA
FRANCE
HUNGARY
IRELAND
ITALIA
NETHERLANDS
NORGE
ÖSTERREICH
POLSKA
PORTUGAL
SCHWEIZ
SUOMI
SVERIGE
TÜRKİYE
U.K.
..........................
START
AUTOPROGRAMMING
BACK
MENU
AUTOPROGRAM
SEARCHING % 20
STOP
In the Country Selection menu, select
the country, whose broadcast you would
like to watch in priority, by pressing the
right/left movement buttons and start
autoprogramming by pressing the OK
button. The channels will be automatically
searched and those found will be stored in
memory starting from the program selected
in the Setup menu. At the same moment,
the Autoprogram menu will be displayed
and a marker indicating the progress of the
autoprogramming will appear as shown
below.
MENU
SETUP
SYSTEM BG
CHANNEL S06
FINE TUNE 0
SEARCH
PROGRAM NO P13
STORE
AUTOPROGRAM
CHANGE
BACK
MENU
SETUP
SYSTEM BG
CHANNEL S06
FINE TUNE 0
SEARCH
PROGRAM NO P13
STORE
AUTOPROGRAM
SELECT
BACK
Select PROGRAM NO tab by pressing
the Up/Down movement buttons in Setup
menu, enter the channel number to be
searched and stored automatically, then
select AUTOPROGRAM tab by using the
Up/Down movement buttons and press
OK
button; Country Selection menu will be
displayed.
To stop the process at any given time,
please press the MENU button. The
Program Table, which will allow you to sort
the channels as you wish, will be displayed
after the automatic search is complete.
6.4.2-Manual tuning of channels and
storing in the memory
6.4.2.1-If you already know the
channel number
Press the MENU button. Move to the
SETUP menu by pressing the Down
movement button in the Main Menu and
confirm your selection with the OK button.
Setup menu will be displayed.