Bekamak BMSY 360 CDGH, Manual

Page: 3 / 32

GENERAL INFORMATION
-
THE MACHINES ARE MANUFACTURED IN COMPLIANCE WITH THE ACCIDENT
PREVENTION RULES IN FORCE.
-
STRICTLY COMPLY WITH THE INSTRUCTIONS CONTAINED IN THIS MANUAL TO OBTAIN
THE BEST PERFORMANCE FROM THE MACHINE. STRICT COMPLIANCE WITH THE RULES
CONTAINED HEREWITH WILL ENSURE OPTIMUM RESULTS AND AVOID ANY
INCONVENIENCE CAUSED BY THE NON-COMPLIANCE OF OPERATION AND
MAINTENANCE INSTRUCTIONS.
-
CLOSELY FOLLOW THE INSTRUCTIONS GIVEN BELOW TO AVOID CONTACTING THE
MANUFACTURER FOR THE PROBLEMS WHICH CAN BE EASILY SOLVED..
-
IF AFTER HAVING STRICTLY COMPLIANCE WITH THE GIVEN INSTRUCTIONS, THE
PURCHASER STILL NEEDS THE HELP OF OUR TECHNICAL ASSISTANCE SERVICE, HE MUST
SUPPLY ALL THE TECHNICAL INDICATIONS NECESSARY TO DETERMINE THE TYPE OF
PROBLEM AND/OR THE PARTS WHICH ARE NOT FUNCTIONING CORRECTLY. THIS WILL
ENABLE OUR TECHNICAL ASSISTANCE SERVICE TO INTERVENE QUICKLY AND
EFFICIENTLY ON THE MACHINE.
COPIES OF THE INSTRUCTION MANUAL MAY BE REQUESTED UPON INDICATION OF THE
MACHINE SERIAL NUMBER .
GENERAL SAFETY NOTES
ALL INSTALLATION WORK INCLUDING THE ELECTRICAL CONNECTION MUST ONLY BE CARRIED
OUT BY QUALIFIED PERSONNEL.
THE MACHINE MUST ONLY BE OPERATED BY A TECHNICALLY TRAINED AND EXPERIENCED
OPERATIVE WHO IS ALSO INSTRUCTED IN ‘SAFETY AT WORK ’ PROCEDURES.
ANY ADJUSTMENTS, CLEANING, REPAIRS OR CHANGING OF THE SAW BLADE MUST UNDER NO
CIRCUMSTANCES BE PERFORMED UNLESS THE MACHINE IS FULLY ISOLATED FROM THE
ELECTRICAL POWER SUPPLY. ENSURE THE EMERGENCY STOP BUTTON ON THE CONTROL
BINNACLE IS PRESSED AND THE POWER SUPPLIES AT THE MAINS ARE DISCONNECTED.”
THE BAND SAW MUST BE REGULARLY INSPECTED AND MAINTAINED IN GOOD SERVICEABLE
CONDITION. EYE PROTECTION, EAR PROTECTION, GLOVES AND PROTECTIVE CLOTHING MUST BE
WORN WHEN ANY OF THE ABOVE PROCEDURES ARE BEING CARRIED OUT, AS WELL AS WHEN
CUTTING FLUID IS PREPARED, INTRODUCED OR DISPLACED FROM THE BAND SAW MACHINE (THE
RELEVANT ENVIRONMENTAL REGULATIONS MUST BE OBSERVED IN CASE OF THE USE AND
DISPOSAL OF CUTTING FLUID ETC.)
THE BAND SAW MUST BE INSTALLED ON GROUND. OBSERVE THE PERMISSIBLE FLOOR LOAD.
THAN THE BAND SAW MACHINE HAS BEEN PROPERLY BOLT TO GROUND SECURELY.
ALLOW SUFFICIENT WORKING SPACE AROUND THE BAND SAW OF AT LEAST 1 METER.
INSTALLATIONS OF STOCK ROLLER CONVEYORS REQUIRE ADDITIONAL SPACE AND POSSIBLY A
LIFTING MECHANISM FOR HEAVY WORK PIECES. ALWAYS ENSURE THAT THE WORKING AREA
AROUND THE BAND SAW IS WELL LIT.