BEKA BA568E, Manual

Page: 22 / 33

6.3 Access Pulse output sub-menu:
PuL5E oP
Using the
&
or
*
push button scroll through the
Counters configuration menu until
PuL5E . oP
is
displayed, pressing
(
will then access the pulse
output sub-menu which is shown in Fig 10.
Fig 10 Pulse output configuration sub-menu
6.4 Enable pulse output:
EnbL
This function allows the pulse output to be disabled
or enabled without altering any of the pulse output
parameters. Using the
&
or
*
push button select
EnbL
in the pulse output sub-menu and press
(
. to
reveal the existing setting
on
or
oFF
. The function
can be changed by pressing the
&
or
*
push
button followed by the
)
button to return to
EnbL
prompt.
6.5 Source of output pulse:
5ourCE
The output pulse may be derived from:
dirECt A
Output is a synchronous
duplicate of input A pulse.
dirECt b
Output is a synchronous
duplicate of input b pulse.
5CALEd
Output is derived from the total
display and is only functional
when the
Count
function is
configured for
A
+
b
. When
5CALEd
is selected two additional
functions,
diVidE
and
durArion
,
appear in the pulse output sub-
menu.
Using the
&
or
*
push button select
5ourCE
in the
pulse output sub-menu and press
(
. to reveal the
existing pulse source. The function can be changed
by pressing the
&
or
*
push button followed by
the
)
button to return to
5ourCE
prompt.
6.6 Divide output pulse frequency:
diVidE
When the output pulse is derived from the total
display the output pulse frequency may be divided
by:
1
10
100
1000
10000
Using the
&
or
*
push button select
diVidE
in the
pulse output sub-menu and press
(
to reveal the
existing divisor. The value can be changed by
pressing the
&
or
*
push button to select the
required value followed by the
)
button to return to
diVidE
prompt.
Note: This function only appears in the sub-menu
when the output pulse is derived from the
total display.
22