1. Description
2. Operation
2.1 Controls
2.2 Displays
3. Applications
3.1 Flow transmitter loops
3.2 Resetting the total display to zero
3.3 Remote indication
4. Installation
4.1 Location
4.2 Installation procedure
4.3 EMC
5. Configuration and Calibration
5.1 Calibration structure
5.2 Accessing configuration & calibration
functions.
5.3 Summary of configuration
functions.
5.4 Rate totaliser function
5.5 Display resolution
5.6 Display update time
5.7 Upper display
5.8 Lower display
5.9 Position of decimal points
5.10 Calibration of rate display using an
external current source.
5.11 Calibration of rate display using internal
reference.
5.12 Clear grand total
5.13 Timebase
5.14 Function of
P
push button
5.15 Total scale factor
5.16 Clip off
5.17 Local reset of total and grand total
displays.
5.18 Security code
5.19 Reset to factory defaults
5.20 Over-range
6. Lineariser
6.1 Calibration using external current
source.
6.1.1
Example, Adding break-points
to a new Rate Totaliser
6.2 Calibration using internal reference
6.2.1
Example, Adding break-points
to a new Rate Totaliser
6.3 Error messages
6.4 Under and over-range
6.5 Default configuration
7. Calibration Examples
7.1 Using an external current source
7.2 Using the internal reference
8. Maintenance
8.1 Fault finding during commissioning
8.2 Fault finding after commissioning
8.3 Servicing
8.4 Routine maintenance
8.5 Guarantee
8.6 Customer comments
9. Accessories
9.1 Units of measurement and
instrument identification.
9.2 Alarms
9.2.1 Solid
state
output
9.2.2 Configuration and adjustment
9.2.3 Alarm enable
9.2.4 Type of alarm
9.2.5 Setpoint adjustment
9.2.6 Alarm function
9.2.7 Alarm output status
9.2.8 Hysteresis
9.2.9 Alarm
delay
9.2.10 Alarm silence time
9.2.11 Flash display
9.2.12 Access setpoint
9.2.13 Adjusting alarm setpoints
from display mode.
9.3 Display backlight
9.3.1
Loop powered
9.3.2
Separately powered
9.4 External keypad
9.5 Pipe mounting kits
2222
CONTENTS
The BA554E is CE marked to show compliance with the European EMC Directive 2004/108/EC
