20
7.3 Default configuration
If the transmitter’s configuration is not specified at the
time of ordering, the instrument will be configured as
follows but can easily be reconfigured on-site.
Function Factory default
Transmitter input ‘InPut’
3 wire RTD
Sensor type ‘t.tYPE’
Pt100
Units of digital display ‘dEG’
ºC
Display resolution ‘rESn’
Low
Sensor fault ‘FAuLt’
Off
4/20mA output ‘CAL’
0.0 to 100.0
Bargraph display ‘bAr’
Left hand
justification.
Bargraph starts at
digital display 0.0
and finishes at
digital display
100.0
Access code ‘CodE’
0000 which
disables this
function.
