BEKA BA384E, Manual

Page: 37 / 68

37
8.5 Enable pulse output:
Enbl
This function allows the pulse output to be disabled
or enabled without altering any of the pulse output
parameters. Using the
&
or
*
push button select
EnbL
in the pulse output sub-menu and press
(
to
reveal the existing setting
on
or
oFF
. The function
can be changed by pressing the
&
or
*
push
button followed by the
)
button to return to
EnbL
prompt.
8.6 Source of output pulse:
5ourCE
The output pulse may be derived from:
dirECt-A
Rate Totaliser input-A pulse.
Output is a duplicate of input-A
pulse.
dirECt-b
Rate Totaliser input pulse-b
Output is a duplicate of input-b
pulse.
5CALEd
Composite total
Input A+b which is defined by the
Count
function in the configuration
menu.
A pulse output occurs each time
the least significant digit of the
composite total is incremented.
The frequency of the pulse output
may be be divided and width
defined by functions
diVidE
and
durAtion
which are only available
when
5CALEd
is selected.
Note: When input A – input b
A:-b
is selected in the Count
function, the scaled pulse output
5CALEd
is not available.
Using the
&
or
*
push button select
5ourCE
in the
pulse output sub-menu and press
(
to reveal the
existing pulse source. The function can be changed
by pressing the
&
or
*
push button followed by
the
)
button to return to
5ourCE
prompt.
8.7 Divide output pulse frequency:
diVidE
When the output pulse is derived from the least
significant digit of the composite total, the output
pulse frequency may be divided by:
1
10
100
1000
10000
Using the
&
or
*
push button select
diVidE
in the
pulse output sub-menu and press
(
to reveal the
existing divisor. The value can be changed by
pressing the
&
or
*
push button to select the
required value followed by the
)
button to return to
diVidE
prompt.
Note: This function only appears in the pulse
output sub-menu when the output pulse is
derived from the composite total.