BEKA BA337E-SS, Manual

Page: 22 / 65

Display Summary of function
LoC Clr
Local reset
Contains sub-menu with two
functions enabling total and grand
total to be reset to zero via the front
panel push buttons when the Rate
Totaliser is in the totalisation mode.
See section 6.18
Local total reset Clr tot
When
on
is selected total display is
reset when
&
and
*
buttons are
operated simultaneously for more
than 3 seconds in the operating mode.
See section 6.19
Local grand total reset
clr gtot
When
on
is selected the grand total is
reset when the
)
and
*
buttons
are operated simultaneously for more
than 10 seconds in the operating
mode.
Note: Once reset, the grand total can
not be restored.
See section 6.20
Display Summary of function
CLr-Gtot
Reset grand total from
configuration menu.
This function resets the grand total
to zero from within the configuration
menu when
CLr YE5
is selected, and
5urE
is entered to confirm the
instruction.
Note : Once reset, the grand total
can not be recovered.
See section 6.21
CodE
Security code
Defines a four digit alphanumeric
code which must be entered to gain
access to the configuration menu.
Default code
0000
disables the
security function and allows
unrestricted access to all
configuration functions.
See section 6.22
r5Et def
Reset to factory defaults
Returns the Rate Totaliser
configuration functions to the factory
default shown in section 6. To
prevent accidental use the request
must be confirmed by entering
5urE
before the reset will be executed.
See section 6.23
22