7
User manual
1.
BEFORE YOU START
1.1 What is included
1
–
T-1000S digital LED strip controller with SD card
1
–
manual
1.2 Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all
parts are present, and have been received in good condition. Notify the shipper immediately and retain
packing material for inspection if any parts appear damaged from shipping or the carton itself shows
signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
2.
USAGE
2.1 System features
•
32-65536 Gray level, support software gamma correction.
•
Support the rules and special-shaped handle.
•
Can support 1024/2048 pixels.
•
Off-line (SD card) control, play back content stored in the SD card.
•
Store a maximum of 16 programs, copy multiple files to the SD card in order, after formatting the SD
card as “FAT” format.
•
The programs must be named in orders, just as: 00_1.led, 01_1.led, 02_1.led …
•
It can use many sets to connect without reset. IC compatible with single and double line, if want to
control the lamps with single IC, no need to connect the CLK wire.
Remark
:
•
When T-1000S controller control lamps with 32 Gray level, every port load less than 1024 lamps the
frame rate can reach 30fps. With 256 Gray level, every port load less than 512 lamps the frame rate
can reach 30 fps.
•
T-1000S must use the new software LedEdit 2014 V2.44.
Before copy files to SD card, the SD card must be formatted as FAT format!
The SD card in controller cannot be hot-swappable, plug the SD card every time, you must first disconnect
the power supply!
T-1000S
