Appendix
Operating manual NORA Alu
V2.13 E
Page 43 of 52
13.6.3 Replacing the handle
Image 1:
Required tools:
1 combination wrench
17 mm
1 small flat-head
screwdriver
1 ratchet
1 nut 17 mm
Image 2:
Additional material:
1 handle
Image 3:
Loosen and remove
the two left-hand
cover caps by
means of the flat-
head screwdriver
(displayed in green
in the picture).
Image 4:
Loosen and remove
the two right-hand
cover caps by
means of the flat-
head screwdriver.
Image 5:
Use the ratchet and
the combination
wrench to loosen
the bottom screw
connection of the
handle.
Image 6:
Use the ratchet and
the combination
wrench to loosen
the top screw
connection of the
handle.
Image 7:
Now you can
remove the two nuts
as well as the
washers.
Image 8:
Then remove the
two screws and the
washers.
Image 9:
Remove the handle.
Re-assemble in reversed order!
