Appendix
Operating manual CARLO Alu 230
V2.7 E
Page 44 of 56
13.6 Spare parts / Consumables
Spare parts and consumables are available upon request from your BEKA Hospitec
distributor or directly from the manufacturer.
Please note:
You cannot change all parts yourself.
The installation may require the expertise of a trained specialist in electrical /
plumbing.
13.7 Mounting instructions
13.7.1 Rear Castor Replacement
Image 1:
Required tools:
1 x 10 mm Allen
wrench
Image 2:
Additional parts/tools:
1 x rear castor
(Order number
S9200130)
1 x thread lock fluid
(medium tight)
Image 3:
Put an object (e.g.
wooden block) under
the side where you
want to replace the
castor to free the
castor.
Image 4:
Unscrew the screw of
the castor using the
Allen wrench.
Image 5:
Remove the screw of
the castor. Hold the
castor back with your
hand! Remove the
castor with the screw
Image 6:
Remove the cover
plate with thread and
fixing pins. Caution,
the fixing pins are
loose. Make sure you
do not lose a fixing
pin!
