Operation
Operating manual CARLO EP & Classic
V2.10 E
Page 27 of 56
Display
maximum weight
If the LED-
indication “MAX” is displayed the highest possible load
capacity of the CARLO Alu is reached. In such case, lower the patient
and use another sling hoist with a higher load capacity.
Spreading of
the Carrier
Frame
Keep the button
of the handset pressed to spread the carrier
frame. The carrier frame of the CARLO Alu is spread. Release the
button as soon as the desired spread width is reached. The spreading
movement is stopped. When the maximum spreading position is
reached, the movement is automatically stopped.
Keep the button
of the handset pressed to close the carrier frame.
The carrier frame of the CARLO Alu is closed. Release the button as
soon as the desired spread width is reached. The spreading movement
is stopped. When the minimum spreading position is reached, the
movement is automatically stopped.
The spreadable carrier frame highly increases the stability of the sling
hoist.
Tilting the
Spreader Bar
(only possible
with EP spreader
bar)
Keep the button
of the handset pressed to change the sitting
position of the patient/resident. The spreader bar is tilted backwards,
thus bringing the patient/resident into a lying position. Release the
button as soon as the desired position is reached. The tilting
movement is stopped. When the end position is reached, the tilting
movement is automatically stopped.
Keep the button
of the handset pressed to set the spreader bar
back upright. The spreader bar is tilted forwards, thus bringing the
patient/resident into a sitting position. Release the button as soon as
the desired position is reached. The tilting movement is stopped.
When the end position is reached, the tilting movement is
automatically stopped.
